Linear AE-100 User Manual download pdf (Page 29)

M O D E L A E - 1 0 0

V E R X . X

1 T O C O N F I R M :

T A L K T I M E : 0 6 0

ALTERNATE PROGRAMMING METHOD

O P E N T I M E : 4

L O C K - O U T C O U N T : 3

FUNCTION CODE LOCAL PROGRAMMING TELEPHONE PROGRAMMING

DISPLAY SYSTEM

INFORMATION

The Model number and ﬁ rmware

version installed in the AE-100

can be displayed.

Step 1 Enter Function Code 46, then press #.

Step 2 The display will show the model number

and ﬁ rmware version number of the

ﬁ rmware installed in the unit.

Step 3 Press #.

NOT AVAILABLE

TOTAL MEMORY

RESET

This command will erase all data

and restore the factory settings.

CAUTION: This utility

command will erase all the data

in the unit.

Step 1 Enter Function Code 50, then press #.

Step 2 Enter 1 to conﬁ rm the reset.

- OR -

Enter ✱ to cancel this command.

NOT AVAILABLE

MAXIMUM VISITOR

TALK TIME

If for some reason the resident

does not press the telephone

keys to grant or deny access or

does not hang up, the system

will automatically disconnect the

visitor after 60 seconds.

At ten and ﬁ ve seconds before

the disconnect a tone will sound

on the telephone to remind

the resident of the pending

disconnect. The resident can

extend the talk time by pressing

the # key on their telephone. The

disconnect time can be adjusted

from 10-180 seconds.

Step 1 Enter Function Code 70, then press #.

Step 2 The display will show the current talk time setting.

Enter the new talk time (010-180 seconds).

Step 3 Press #.

Step 1 Enter Function Code 70 and

press #, one short beep sounds.

Step 2 Enter the new talk time (010-180 seconds)

and press #, two short beeps sound.

Step 3 Press #, two short beeps sound

ACCESS RELAY

ACTIVATION TIME

The factory setting will cause

the access relay to activate for

4 seconds. The activation time

can be set from 4-99 seconds to

accommodate different types of

access control devices.

Step 1 Enter Function Code 71, then press #.

Step 2 The display will show the current access relay

activation time setting. Enter the new access

relay activation time (04-99 seconds).

Step 3 Press #.

Step 1 Enter Function Code 71 and

press #, one short beep sounds.

Step 2 Enter the new access relay

activation time (04-99 seconds).

Step 3 Press #, two short beeps sound.

KEYPAD LOCKOUT

COUNT

The system counts the number

of invalid Access Codes entered

at the keypad. If the invalid

entries exceeds the lockout count

number, the keypad is locked

out for 90 seconds. The factory

setting for the lockout count is

three. The lockout value can be

from one to nine.

Step 1 Enter Function Code 72, then press #.

Step 2 The display will show the current lockout count.

Enter the new lockout count (1-9 tries).

Step 3 Press #.

Step 1 Enter Function Code 72 and

press #, one short beep sounds.

Step 2 Enter the new lockout count (1-9 tries).

Step 3 Press #, two short beeps sound

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments

Linear AE-100 User Manual Page 29

Comments to this Manuals

Related products and manuals for Door intercom systems Linear AE-100