Linear AE-100 User Manual download pdf (Page 18)

PPN 33

33#CODE#CODE#

CODE = THE STAND-ALONE ENTRY CODE TO DELETE

CODE = THE STAND-ALONE ENTRY CODE

AGAIN FOR VERIFICATION

DELETING A STAND-ALONE ENTRY CODE

PPN 31

31#CODE#CODE#

CODE = NEW STAND-ALONE ENTRY CODE

AGAIN FOR VERIFICATION

ADDING A STAND-ALONE ENTRY CODE

PPN 38

38#LANG#

LANG = SYSTEM DISPLAY LANGUAGE

1 = ENGLISH 2 = SPANISH

3 = FRENCH 4 = PORTUGUESE

SYSTEM DISPLAY LANGUAGE

FACTORY SETTING: ENGLISH

Stand-alone Entry Code Programming

A Stand-alone Entry Code is a number entered at the AE-100 keypad to

request access. Up to 125 4-digit Stand-alone Entry Codes can be set.

✦ NOTE: Each Stand-alone Entry Code programmed reduces the

possible number of Directory Entries by one.

Use the programming worksheet supplied to organize the

Stand-alone Entry Code data prior to entering it into the system.

For each of the following steps, enter the Master Password and enter

Programming Mode (if the unit is not already in that mode). Exit

Programming Mode when all programming is complete.

Adding a Stand-alone Entry Code

Stand-alone Entry Codes are entered individually.

1. Press

2. Enter the new Stand-alone Entry Code.

3. Press

4. Enter the new Stand-alone Entry Code again for veriﬁ cation.

5. Press

Deleting a Stand-alone Entry Code

Stand-alone Entry Codes can be deleted individually (to delete all

Stand-alone Entry Codes, see programming Step 93).

1. Press

2. Enter the Stand-alone Entry Code to delete.

3. Press

4. Enter the Stand-alone Entry Code to delete again.

5. Press

System Options

For most installations the factory settings for the system will be

appropriate. To customize the system, enter programming mode via

telephone or keypad.

Use the programming worksheet supplied to log any system option

changes prior to entering it into the system.

For each of the following steps, enter the Master Password and enter

Programming Mode (if the unit is not already in that mode). Exit

Programming Mode when all programming is complete.

System Display Language

The factory default language is English. Three other languages can be

selected as the language for the user and programming displays.

✦ NOTE:This step cannot be performed remotely through the

telephone.

✦ NOTE: The system supports one display language at a time.

1. Press

2. Choose a language:

Enter 1 for English•

Enter 2 for Spanish•

Enter 3 for French•

Enter 4 for Portuguese•

3. Press

STANDARD PROGRAMMING METHOD

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

Comments to this Manuals

No comments

Linear AE-100 User Manual Page 18

Comments to this Manuals

Related products and manuals for Door intercom systems Linear AE-100