Linear AE-100 User Manual download pdf (Page 28)

U N I T S :

A R E Y O U S U R E ? 5

( E R R O R M E S S A G E )

L o w B a t t e r y

N O A C

C O M M U N I C A T I O N

E R R O R U N I T #

C L E A R E R R O R L O G ?

Y E S E N T E R 5

U N I T S R E S P O N D I N G

L A N G U A G E : 1 - 4

ALTERNATE PROGRAMMING METHOD

FUNCTION CODE LOCAL PROGRAMMING TELEPHONE PROGRAMMING

COPY ALL MASTER

MEMORY TO

SUB-UNITS

To synchronize programming

in multi-unit installations, all

system data can copied from the

master unit to selected sub-units.

This data includes the Directory

Entries, Stand-alone Access

Codes, and all system option

settings (except the sub-unit

number).

NOTE: This utility command

can only be performed from the

“master” unit.

CAUTION: This utility

command will overwrite ALL

data in the sub-unit(s) selected.

Step 1 Enter Function Code 34, then press #.

Step 2 Enter the number(s) (2, 3, and/or 4) of all the

sub-units to copy the data to, then press #.

Step 3 Enter 5 for veriﬁ cation, then press #.

- OR -

Enter ✱ to cancel this command.

NOTE: Function Codes 7 and 8 must be programmed

before this command will operate.

Step 1 Enter Function Code 34 and

press #, one short beep sounds.

Step 2 Enter the number(s) (2, 3, and/or 4)

of all the sub-units to copy the data to,

then press #, one short beep sounds.

Step 3 Enter 5 for veriﬁ cation, then press #,

two short beeps sound. (Any entry other

than 5# will cancel the command.)

NOTE: To allow for multi-unit network

communications, when executing this

command remotely over the telephone,

the system will disconnect your call

after Step #3 then copy the data from

the master unit to the sub-units.

DISPLAY/CLEAR

SYSTEM ERRORS

The system’s power indicator will

ﬂ ash if any system errors occur.

These errors include loss of AC

power and low backup battery. In

multi-unit installations, the master

unit logs communication errors

with sub-units.

Step 1 Enter Function Code 35, then press #.

If there are any errors, they will be

displayed. Possible error messages are:

Step 2 Press # to display the next error message (if any).

Step 3 After the last error message, the option

to clear the error log will be displayed.

Enter 5 and press # to clear the log, or

just press # to keep the log and exit.

NOT AVAILABLE

POLL SUB-UNITS

In multi-unit installations, this

utility command will instruct the

master unit to poll (request and

receive communications) the

sub-units. This command is used

for testing purposes only.

Step 1 Enter Function Code 37, then press #.

Step 2 The display will show the numbers of sub-units that

responded error free on the ﬁ rst try. Press ✱ to exit.

Step 1 Enter Function Code 37 and press #.

If all sub-units respond error free,

three short beeps will sound.

If any sub-units don’t respond error

free, two long beeps will sound.

SYSTEM DISPLAY

LANGUAGE

The factory default language is

English. Three other languages

can be selected as the language

for the user and programming

displays.

NOTE: The system supports one

display language at a time.

Step 1 Enter Function Code 38, then press #.

Step 2 Enter:

1 for English (Default).

2 for Spanish.

3 for French.

4 for Portuguese.

Step 3 Press #.

NOT AVAILABLE

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments

Linear AE-100 User Manual Page 28

Comments to this Manuals

Related products and manuals for Door intercom systems Linear AE-100