Linear AE-100 User Manual download pdf (Page 19)

PPN 51

51#COUNT#

COUNT = NUMBER (1-9) OF INCORRECT ENTRIES

THAT WILL CAUSE A 90 SECOND LOCKOUT

KEYPAD LOCKOUT COUNT

FACTORY SETTING: 3 TRIES

PPN 57

57#LINE 1#LINE 2#

LINE 1 = UP TO 16 CHARACTERS TEXT

LINE 2 = UP TO 16 CHARACTERS TEXT

WELCOME DISPLAY TEXT

FACTORY SETTING: LINEAR ACCESS TELEPHONE ENTRY

PPN 61

61#ANSWER#

ANSWER = 0 FOR AUTO ANSWER OFF

ANSWER = 1 FOR AUTO ANSWER ON

AUTOMATIC TELEPHONE ANSWER

FACTORY SETTING: AUTO ANSWER ON

PPN 52

52#SECONDS#

SECONDS = ACTIVATION TIME (04-99 SECONDS)

ACCESS RELAY ACTIVATION TIME

FACTORY SETTING: 4 SECONDS

PPN 62

62#CHIRP#

CHIRP = 0 FOR KEYSTROKE CHIRP OFF

CHIRP = 1 FOR KEYSTROKE CHIRP ON

SPEAKER CHIRP ON KEYSTROKE

FACTORY SETTING: KEYSTROKE CHIRP ON

STANDARD PROGRAMMING METHOD

System Options (Continued)

Keypad Lockout Count

The system counts the number of invalid Entry Codes entered at the

keypad. If the invalid entries exceeds the lockout count number, the

keypad is locked out for 90 seconds. The factory setting for the lockout

count is three. The lockout value can be from one to nine.

1. Press

2. Enter the number for the lockout count (1-9).

3. Press

Access Relay Activation Time

The factory setting will cause the access relay to activate for 4 seconds.

The activation time can be set from 4-99 seconds to accommodate

different types of access control devices.

1. Press

2. Enter the time (in seconds) for access relay to stay activated (04-99)

3. Press

Welcome Display Text

The AE-100 display will show a visitor a welcome message alternating

with instructions on how to ﬁ nd and call a resident. The welcome message

can be customized to suit the installation.

✦ NOTE: This step cannot be performed remotely through the telephone.

1. Press

✦ NOTE: To enter capital letters only, press ﬁ rst before entering the text.

2. Enter the new text for the top line of the display (up to 16 characters).

3. Press

✦ NOTE: To enter capital letters only, press ﬁ rst before entering the text.

Enter the new text for the bottom line of the display (up to 16 characters).

5. Press

Automatic Telephone Answer

The factory setting will allow the system to detect a ring signal on the

telephone line and answer the call.

✦ NOTE: The automatic answer feature can be turned off, although remote

programming, remote access control by residents, and resident call-back

features will no longer function.

1. Press

2. Select the option for automatic telephone answering:

Enter 0 to turn OFF automatic telephone answering.•

Enter 1 to turn ON automatic telephone answering.•

3. Press

Speaker Chirp on Keystrokes

The factory setting will cause the speaker to chirp when each key on the

keypad is pressed. Alternately, the speaker chirp can be turned off.

1. Press

2. Select the option for keystroke speaker chirps:

Enter 0 to turn OFF the keystroke speaker chirps.•

Enter 1 to turn ON the keystroke speaker chirps.•

3. Press

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

Comments to this Manuals

No comments

Linear AE-100 User Manual Page 19

Comments to this Manuals

Related products and manuals for Door intercom systems Linear AE-100