Linear DVS-1200 User Manual download pdf (Page 41)

SYSTEM REPORTING CODES

✦ Refer to the System Reporting Codes table to

view/edit the reporting codes for the keypad FIRE

and EMERGENCY buttons and for each of the

four Console conditions. The factory settings are

listed, along with a blank area to write in the new

installation values.

STEPS #261-266

Any value from 0-99 can be programmed for each

event using these steps (enter “0” to stop an event

from reporting).

FORCE ARMING REPORTING CODE

✦ The factory set reporting code for force arming is

“65” (Code 574 with Ademco).

STEP #258 Any value from 0-99 can be programmed for this

event using this step (0 = no report).

✎ NOTE: For force arming reporting, force arming

reports must be enabled. See Page 37.

DURESS REPORTING CODE

✦ The factory set reporting code for Duress is “66”

(Code 121 with Ademco).

STEP #259 Any value from 0-99 can be programmed for this

event using this step (0 = no report).

✎ NOTE: For duress code reporting a keypad duress

code must be programmed. See Page 30

Opening & Closing Reporting Codes Table

System Reporting Codes Table

SYSTEM REPORTING CODES

STEP # PROGRAMMING FUNCTION

POSSIBLE

4 BY 2 VALUES

FACTORY

4 BY 2 VALUES

ADEMCO VALUE

INSTALLATION

4 BY 2 VALUE

258 FORCE ARMING REPORT CODE 0 - 99 65 574

259 DURESS REPORT CODE 0 - 99 66 121

261 SYSTEM FIRE REPORT CODE 0 - 99 68 110

262 SYSTEM EMERGENCY REPORT CODE 0 - 99 69 120

263 SYSTEM TEST/CANCEL REPORT CODE 0 - 99 70 406

264 SYSTEM LOW BATTERY RESTORAL REPORT CODE 0 - 99 71 R302

265 SYSTEM LOW BATTERY CODE 0 - 99 73 E302

OPENING & CLOSING REPORTING CODES TABLE

USER CODE

4 x 2 CLOSING

(ARMING) CODE

4 x 2 OPENING

(DISARMING) CODE

ADEMCO CLOSING

(ARMING) CODE

ADEMCO OPENING

(DISARMING) CODE

MASTER USER CODE1 74 82 R401 C000 E401 C000

RESTRICTED USER CODE #1 75 83 R401 C001 E401 C001

RESTRICTED USER CODE #2 76 84 R401 C002 E401 C002

RESTRICTED USER CODE #3 77 85 R401 C003 E401 C003

RESTRICTED USER CODE #4 78 86 R401 C004 E401 C004

RESTRICTED USER CODE #5 79 87 R401 C005 E401 C005

PAGE ALERT USER CODE (DIALS PAGE NUMBER ONLY, NO CODES REPORTED)

REMOTE ARM & QUICK ARM 81 R407 C007

REMOTE DISARM 89 E407 C007

MNO

0 - 99 FOR CONSOLE

REPORTING CODE

PROGRAMMING STEPS

#261 TO #266

PROGRAM

STORE PROGRAM

ABC

JKL

TUV

0 - 99 FOR FORCE ARMING

REPORTING CODE

PROGRAMMING STEP #258

PROGRAM

STORE PROGRAM

ABC

WXY

0 - 99 FOR DURESS CODE

PROGRAMMING STEP #259

PROGRAM

STORE PROGRAM

ABC

1 2 ... 36 37 38 39 40 41 42 43 44

Comments to this Manuals

No comments

Linear DVS-1200 User Manual Page 41

Comments to this Manuals

Related products and manuals for Safety Linear DVS-1200