Linear DVS-1200 User Manual download pdf (Page 35)

GENERAL COMMUNICATOR OPTIONS

COMMUNICATOR ENABLE

✦ The factory setting for the Console disables

the communicator. If the system is going to be

a non-monitored, local alarm only, leave the

communicator disabled.

STEP #107 If the system is going to be monitored by a

Central Station, enable the communicator with this

programming step.

2-WAY AUDIO

✦ When the Model VB-2 voice module is installed, the

communicator can provide 2-way audio capability.

✦ The audio module can be programmed for

listen-only, 2-way manual operation (using a

pushbutton telephone at the Central Station), and

2-way full duplex hands free operation.

✦ Refer to the VB-2 installation instructions for details

on operating the audio module.

✎ NOTE: The Model VB-2 digital voice response

module must be installed for this option to

function.

✦ The factory setting for the VB-2 audio module is OFF.

STEP #76 The audio module can be set for (1) listen-only, (2)

2-way manual, (3) 2-way full duplex using this step.

✎ NOTE: For safety, 2-way audio will not activate if

the system is disarmed with the duress code.

✎ NOTE:Units programmed for two-way duplex can

still be controlled manually by pressing the “1” or

“3” key. In addition, the Central Station can return

the unit to two-way duplex by pressing the “8” key.

VOICE RESPONSE

✦ The Console can be programmed to allow the

speaker to play audio produced by the VB-2 digital

voice response module.

✦ This selection can also be used when a remote

speaker is connected to the Console.

✦ The factory setting is to disable the speaker from

playing voice module audio.

STEP #78 The Console can be programmed to enable voice

module audio using this step.

✎ NOTE: Turning voice response OFF with this

programming step will only effect the audio produced

by the voice module. It will not stop the Console’s

speaker from sounding local sirens and tones.

✎ NOTE: A Model VB-2 digital voice response module

must be installed for this option to function.

REMOTE LOCKOUT

✦ The factory setting for the communicator allows

remote connection to the Console with Linear's

RA-2400 Remote Access Software and a modem

(unlocked).

STEP #100 The Console can be programmed to not answer

incoming calls, thereby, not allowing remote access

(locked) using this step.

PRS

HOME

AWAY

0 FOR COMMUNICATOR OFF

1 FOR COMMUNICATOR ON

PROGRAMMING STEP #107

PROGRAM

STORE PROGRAM

PRS

MNO

HOME

AWAY

0 FOR NO AUDIO MONITORING

1 FOR LISTEN-ONLY

2 FOR 2-WAY MANUAL

3 FOR 2-WAY FULL DUPLEX

PROGRAM

STORE PROGRAM

PROGRAMMING STEP #76

PRS

TUV

HOME

AWAY

0 FOR NO VOICE RESPONSE

1 FOR VOICE RESPONSE

PROGRAMMING STEP #78

PROGRAM

STORE PROGRAM

HOME

AWAY

0 FOR UNLOCK

1 FOR LOCK

PROGRAMMING STEP #100

PROGRAM

STORE PROGRAM

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 43 44

Comments to this Manuals

No comments

Linear DVS-1200 User Manual Page 35

Comments to this Manuals

Related products and manuals for Safety Linear DVS-1200