Linear DVS-1200 User Manual download pdf (Page 11)

EXTERNAL CONSOLE SPEAKER CONNECTION

✦ An external console speaker sounds system tones

and alerts occupants with a loud siren during alarm.

✦ With the VB-2 module installed, the Central Station

can talk to the occupants through the external

console speaker.

✦ Use an 8-ohm, 10 watt minimum rated speaker. Do

not use a horn/siren with a built-in siren driver.

✦ Up to two 8-ohm speakers can be used with each

Console.

✦ Up to 150 feet of 22 AWG wire can be used with

each speaker.

✦ The system tone volume can be adjusted with the

annunciator volume control.

1. Mount the external speaker.

2. Route the speaker wires from the external speaker

to the Console.

3. Open the Console top cover and locate the main

terminal block.

4. Route the speaker wires up through the wiring

access hole.

5. Remove the wire jumper from the EXT. SPKR & (-)

terminals.

6. Connect the speaker wires to the EXT. SPKR & (-)

terminals.

✎ NOTE: If connecting two external speakers,

connect the second speaker in parallel, to the

same EXT. SPKR & (-) terminals as the ﬁ rst

speaker.

EXTERNAL ALARM SIREN CONNECTION

✦ An external siren alerts occupants and neighbors

with a loud siren during alarm.

✦ Use a 12 volt, 1 amp maximum rated weather-

resistant horn speaker with a built-in siren driver. Do

not use a plain speaker.

✎ NOTE: Connection of an electromechanical bell or

motor bell is not recommended because of the radio

interference generated when the bell is running.

✎ UL NOTE: Not for use in UL installations.

1. Mount the external siren.

2. Route the wires from the external siren to the

Console.

3. Open the Console top cover and locate the main

terminal strip.

4. Route the siren wires up through the wiring access

hole.

5. Connect the siren wires to the RELAY N.O. & (-)

terminals.

✎ NOTE: By removing the Console’s auxiliary fuse,

the relay contacts will become isolated. Use the

RELAY N.O. & RELAY DRY terminals to switch an

externally powered load.

EXT. SPKR

(-)

H/A -

H/A +

RELAY N.O.

RELAY DRY

MAIN TERMINAL BLOCK

EXT. SPKR(S)

8 OHM/10 WATT

2 SPKRS MAX.

NOTE: REMOVE

JUMPER FOR

EXT. SPEAKERS

OPTIONAL

VOICE MODULE

MODEL: VB-2

MAIN

TERMINAL

BLOCK

ANNUNCIATOR

VOLUME

CONTROL

LINEAR SECURITY CONSOLE MODEL DVS-1200

CONNECT SPEAKER LEADS

TO EXT. SPKR & (-) TERMINALS

REMOVE

JUMPER

EXTERNAL

CONSOLE

SPEAKER

8 OHM, 10 WATT

MINIMUM

EXT. SPKR

(-)

H/A -

H/A +

RELAY N.O.

RELAY DRY

MAIN TERMINAL BLOCK

EXTERNAL SIREN

12 VDC 1 AMP

MAXIMUM

OPTIONAL

VOICE MODULE

MODEL: VB-2

MAIN

TERMINAL

BLOCK

LINEAR SECURITY CONSOLE MODEL DVS-1200

EXTERNAL

CONSOLE

SPEAKER

EXTERNAL

ALARM

SIREN

CONNECT SIREN LEADS TO

(-) & RELAY N.O. TERMINALS

EXTERNAL

ALARM RELAY

12 VDC 1 AMP

MAXIMUM

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 43 44

Comments to this Manuals

No comments

Linear DVS-1200 User Manual Page 11

Comments to this Manuals

Related products and manuals for Safety Linear DVS-1200