Linear DVS-1200 User Manual download pdf (Page 20)

HOME MODE

✦ Use this mode when sleeping or when anyone is

staying inside.

✦ Home Mode causes an instant alarm when any

perimeter sensor is triggered.

✦ Home Mode causes a delayed alarm when any exit/

entry sensor is triggered (except in Home Instant

Mode when they are instant).

✦ Alarm siren stops automatically after ﬁ ve minutes

and the system will remain armed.

✦ Home Mode ignores all interior sensors (motion

detectors, etc.).

1A. Arm to Home Mode by entering a user code, and

pressing HOME.

1B. The user can “Quick Arm” to Home Mode from Off

or Chime Mode by pressing HOME for two seconds.

(Quick arming can be disabled; see the “Advanced

Programming” section of this manual.)

✴ When the system is armed to the Home Mode, the

keypad(s) will sound a “Gong” and two “Beeps”.

2. Enter a user code and press OFF or CHIME to disarm

from Home Mode and/or stop the alarm siren.

✴ If an alarm has occurred, multiple Beeps will sound after

disarming and the sensor indicator for the sensor(s) that

caused the alarm will ﬂ ash (switch to Off Mode again or

re-arm the system to stop the ﬂ ashing alarm memory light).

SECURE EXIT

1. If the system is already in the Home Mode and

the user wants to exit the premises while leaving

someone inside with the system still in Home Mode,

enter a user code and press the HOME key.

✴ The HOME light will blink for 60 seconds. No exit delay

Beeps will sound during the Exit Delay.

2A. The user can leave through a door with a delayed

perimeter sensor during the 60 second Exit Delay

without causing the Console to begin an Entry

Delay.

2B. Re-entering during the silent Exit Delay will

extend the Exit Delay another 60 seconds (one

time only).

✎ NOTE: The Exit Delay time can be changed; see the

“Advanced Programming” section of this manual.

HOME INSTANT MODE

1. If the system is already in the Home Mode and the

user wants to make all exit/entry sensors instant,

press HOME for two seconds.

✴ Two “Gongs” and two “Beeps” will sound and the HOME

light will blink continuously.

2. Because all exit/entry sensors will now cause an

instant alarm when in Home Mode, the Console

must be disarmed before opening any exit/entry

delay door.

✎ NOTE: If quick arming is disabled the Home Instant

Mode is unavailable.

MANUAL BYPASSING OF SENSORS

✦ Manual bypassing of sensors in the Home Mode

allows arming of the system at night with open

windows, while still having perimeter protection with

other closed doors and windows.

1. The Console will resist arming with open door or

window sensors.

✴ Four high-low Beeps to warn the user that something is

open and the system will remain in the previous mode.

✴ Lit sensor status indicators show which sensors are open.

2. To manually bypass the open sensors, arm the

system again within ﬁ ve seconds.

✴ A “Gong” and two “Beeps” will sound, the HOME indicator

will light, and the open sensors will be bypassed.

✎ WARNING: Bypassed sensors cannot cause an

alarm. Closing the sensor removes the bypass.

START IN OFF

OR CHIME MODE

YOUR

USER

CODE

DONE

1 GONG

& 2 BEEPS

(OPTIONAL)

HOME MODE

HOME

DONE

1 GONG

& 2 BEEPS

HOLD

DOWN

HOME

START IN OFF

OR CHIME MODE

QUICK ARM

START IN

HOME MODE

YOUR

USER

CODE

DONE

1 GONG

& 2 BEEPS

(OPTIONAL)

HOME

SECURE EXIT

START IN

HOME MODE

DONE

2 GONGS

& 2 BEEPS

HOLD

DOWN

HOME INSTANT

MODE

HOME

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

Comments to this Manuals

No comments

Linear DVS-1200 User Manual Page 20

Comments to this Manuals

Related products and manuals for Safety Linear DVS-1200