Linear AE-1000 User Manual download pdf (Page 18)

AE-1000 Operation

Requesting Access with an Entry Code

• Residents have up to 40 seconds to key in their entry code.

• Up to eight seconds are allowed between each keystroke.

• All digits of the entry code must be entered. Example: If the entry

code length is set for four digits, and the code is 0042, the user

must enter “0 0 4 2”.

• If the wrong key is pressed, pressing the key will reset the

keypad. The correct code can then be entered.

• After a correct code is entered, and if the conditions for granting

access are fulﬁ lled, the programmed relay will activate for the

programmed time.

• If the number of incorrect codes entered exceeds the keypad

lockout count, the keypad will be locked and not accept any entries

for one minute.

• If the Anti-passback feature is enabled, the entry code will be

unusable until the anti-passback time expires.

Requesting Access with a Wireless Transmitter

• Activate a wireless transmitter within radio range of the AE-1000’s

antenna.

• After a valid transmitter is decoded, and if the conditions for

granting access are fulﬁ lled, the programmed relay channel will

activate for the programmed time.

• If the Anti-passback feature is enabled, the transmitter will be

unusable until the anti-passback time expires.

Requesting Access with a Visitor Call

• Press

to view the directory.

• The visitor scrolls through the alphabetical directory entries

viewing the resident names and associated directory numbers

by pressing &

on the keypad. (Holding down the keys will

scroll the display faster.)

• If the visitor already knows the resident’s directory number, they

can enter the directory number to call the resident.

• The system dials the resident’s telephone number to establish

2-way communications.

✦ NOTE: The resident’s telephone number will never be displayed to

the visitor.

• If the resident is using the telephone at the same time a visitor

calls, the display will indicate to the visitor that the line is busy.

• The resident answers the call and converses with the visitor to

determine if access will be granted.

• The resident can use their telephone’s keypad to grant access

activating Relay Channel “A” by pressing

or activating Relay

Channel “B” by pressing . After access is granted, the system

will disconnect the visitor and resident call.

• The resident can disconnect the visitor without granting access by

pressing or by hanging up.

✦ NOTE: The telephone keys that the resident presses can be

customized for the installation.

• The length of time the visitor is allowed to talk can be programmed

from 15-255 seconds. The resident will hear a series of beeps

during the last 10 seconds of talk time. To restart the talk timer, the

resident can press

on their telephone.

220777 C IMAGE18

ENTRY CODE AT REMOTE KEYPADENTRY CODE AT LOCAL KEYPAD

ACTIVATE TRANSMITTER

ANTENNA

ENTER DIRECTORY NUMBER

OR PRESS

SCROLL THROUGH THE RESIDENT

NAMES

PRESS

TO VIEW DIRECTORY

AFTER SCROLLING, ENTER THE RESIDENT'S

DIRECTORY NUMBER AND TALK

WITH THE RESIDENT

THE RESIDENT CAN CONTROL

ACCESS USING TELEPHONE KEYS

RELAY "A"

RELAY "B"

DISCONNECT

VISITOR

TENANT

1 2 ... 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Linear AE-1000 User Manual Page 18

Comments to this Manuals

Related products and manuals for Phones Linear AE-1000